SaltDogg 1471456SSH Municipal-Sized Hydraulic Hopper Spreader User Manual
Instruction manual
1
TM
9049 Tyler Blvd. • Mentor, Ohio 44060
Phone (440) 974-8888 • Fax (440) 974-0165
Toll-Free Fax 800-841-8003 • saltdogg.com
Instruction Manual
Municipal-Sized Hydraulic
Powered Stainless Steel Hopper
Spreaders
—continued inside
IMPORTANT
The Cab to Axle/Tandem dimensions are only guidelines.
Consult federal, state and local weight laws and chassis
manufacturer’s ratings to ensure neither government weight
restrictions, nor GVWR and GAWRs are exceeded.
Table of Contents
General Information .................................................1
Safety Precautions ................................................1-2
Installation Instruction .........................................2-8
Spreader Operation ...............................................2-8
Spreader Maintenance ..........................................2-8
Optional Equipment .................................................5
Repair Parts .......................................................... 6-8
Warranty Information ..............................................8
General Information
2. Average Material Weights
MATERIAL WEIGHT (POUNDS PER CUBIC YARD)
#1 Rock Salt - 950
#2 Rock Salt - 1,215
Coarse Sand - Dry 2,565
Coarse Sand - Wet 3,240
3. Recommended Fastener Torques
Maintain all fastener torques as shown in the fol-
lowing table. Failure to do so may cause injury to
persons.
SAE GRADE 2
SAE GRADE 5
ft-lbs
ft-lbs
5/16-18
11
18
3/8-18
19
31
3/8-24
24
46
7/16-14
30
50
1/2-13
45
75
9/16-12
66
110
5/8-11
93
150
MODEL NO.
OVERALL
LENGTH
WIDTH
HEIGHT
EMPTY
WEIGHT
CAPACITY
CU. YDS.
1471056SSH
162"
84"
60"
2655 lbs.
7.0
1471156SSH
168"
84"
60"
2855 lbs.
8.0
1471256SSH
180"
84"
60"
3055 lbs.
9.0
1471456SSH
204"
84"
60"
3561 lbs.
10.0
1. Recommended Vehicle Requirements
Buyers Municipal-Sized Hopper Spreaders are
intended for spreading abrasives and/or chemi-
cals, primarily for ice and snow control. They are
intended for installation on truck chassis or dump
bodies with GVWR 26,000 lbs. Spreaders are
intended to be mounted on trucks with
Cab To
Axle/Tandem Dimension minimum of 84 inches.