SaltDogg LS6 Liquid Spray System for SHPE1500, 2000 Style Spreaders User Manual
Installation & operator’s manual
9
TM
9049 Tyler Blvd. • Mentor, Ohio 44060
Phone (440) 974-8888 • Fax (440) 974-0165
Toll-Free Fax 800-841-8003 • saltdogg.com
Installation & Operator’s Manual
LS6 Liquid Spray System for
SHPE1500, 2000 Style Spreaders
Installation Instructions
1. Position Support (3013939) in truck’s bed.
Place 30 gal. Tank (#3014062) on support as
show in Fig.1. Strap tank to support using
straps 149650501.
2. Lower spreader onto support, Make
sure support’s long brackets are inside of
spreader legs openings and screws are
between two front legs as shown in Fig.2
3. Secure spreader on support using stops
(3014065) and provided hardware as shown
in Fig.3.
4. Position and attach enclosure LS102 as
shown in Fig.4.
5. Plumb: reservoir, ball valve, filter, pump
enclose and spray nozzle according to
plumbing schematic using supplied fittings,
hose and hose clamps. Do not use Teflon
tape on threads. Use liquid thread sealant.
(see fig.5, 6,7 &8).
—continued inside