Watlow CAS - Manual (Page 47)

Using the CAS
CAS User’s Guide 37
Job Display
Job display appears only if:
• You have turned on the Remote Job Select function. (This function is
explained in Chapter 4: Setup.)
• You have selected a job from the job load menu.
When you load a job, Job display shows you this screen:
If you remotely loaded the job, Job display looks like this:
If you modify a job's parameters while the job is running, you'll see this
message:
If an alarm occurs, the controller switches to Single Channel Display.
CHANNEL PROCESS UNITS
CHANNEL NAME ALARM STATUS
CHANNEL PROCESS UNITS
CHANNEL NAME ALARM STATUS
JOB 3 RUNNING
REMOTELY LOADED
CHANNEL PROCESS UNITS
CHANNEL NAME ALARM STATUS
JOB 3 RUNNING
DATA MODIFIED
JOB 3 RUNNING