Watlow CAS - Manual (Page 55)

Setup
CAS User’s Guide 45
Selectable values: 1, 2, or 3 inputs, or None. These choices have the
following effect:
Job Select Input Polarity
This menu lets you set the polarity of the digital inputs used for job
selection. You can set the Active state to closed (low) or open (high).
Selectable values: High or Low.
Startup Alarm Delay
Use this menu to set a startup delay for process and deviation alarms for
all channels. The scanner does not report these alarm conditions for the
specified number of minutes after the scanner powers up. (The scanner
will always report failed sensor alarms, no matter what startup delay
you set.)
Selectable values: 0 - 60 minutes.
Setting Enables
1 input Jobs 1-2
2 inputs Jobs 1-4
3 inputs Jobs 1-8
None (no inputs) Remote Select disabled
CHANNEL PROCESS UNITS
CHANNEL NAME ALARM STATUS
JOB SEL DIG INS
ACTIVE ? LOW
CHANNEL PROCESS UNITS
CHANNEL NAME ALARM STATUS
STARTUP ALARM
DELAY ? 0 MINS