Watlow CAS - Manual (Page 76)

66 CAS User’s Guide
Setup
Digital Output Test
This menu lets you manually toggle a digital output On or Off to test it.
(Select the output to test in the previous menu.) On may be Low or High
depending on the digital output polarity you set. (All outputs are set to
Off when you exit this menu.)
Press Yes or No to toggle the output state between On and Off.
Keypad Test
This menu lets you test the keypad. Press any key on the keypad to test
the response.The CAS will display the name of the key you have
pressed.
CHANNEL PROCESS UNITS
CHANNEL NAME ALARM STATUS
DIGITAL OUTPUT
NUMBER 34: OFF
CHANNEL PROCESS UNITS
CHANNEL NAME ALARM STATUS
KEYPAD TEST
QUIT = "NO" + "NO"