Watlow CAS - Manual (Page 71)

Setup
CAS User’s Guide 61
High Deviation Alarm Output Number
This menu assigns a digital output which activates when the channel is
in high deviation alarm. The digital output only activates if you have set
the high deviation alarm to On.
Selectable values: 1 to 34, None
NOTE
All digital outputs are combined. Therefore, you can assign more
than one alarm to the same output number, and that output will be
On if any of those alarms are On.
Low Deviation Alarm Type
This menu turns off the low deviation alarm or set it to the alarm
function.
Selectable values: Off, Latched, or Unlatched
CHANNEL PROCESS UNITS
CHANNEL NAME ALARM STATUS
01 HI DEV ALARM
OUTPUT ? NONE
CHANNEL PROCESS UNITS
CHANNEL NAME ALARM STATUS
01 LO DEV ALARM
TYPE ? LATCHED