Din rail mounting, Din rail mounting 31, Figure 2.15—tb50 dimensions / clearances 31 – Watlow PPC-2000 User Manual
Page 55
Advertising
PPC-2000 User’s Guide
Chapter 2: Hardware Installation
Doc.# 30002-00 Rev 2.3
Watlow Anafaze
31
Figure 2.15 TB50 Dimensions / Clearances
DIN Rail Mounting
All factory terminal boards snap onto a DIN rail. A TB50 is
shown in the following figures for illustration purposes only.
To install a terminal board on a DIN rail, place the hook side of
the mounting mechanism over one of the DIN rail lips and snap
the board over the other lip.
3.6 in.
2.6 in.
4.2 in.W
3.4 in.
4.1in. L
2.3 in.
(91 mm)
(66 mm)
(102 mm)
(86 mm)
(104 mm)
(58 mm)
Advertising