Yokogawa 212 Heat Calculator - Manual (Page 20)

3.1.3 Peak and Off-Peak Operation
If Peak and Off-Peak operation is programmed, the following display formats will
be apparent in place of the normal ENERGY display:
Peak Energy default display - Peak
Energy measured since the last reset.
Press DISPLAY Press ACCUM TOTAL
Accumulated Peak
Energy Total
(non-resettable).
Off-Peak Energy measured since the
last reset.
Press DISPLAY Press ACCUM TOTAL
Accumulated Off-Peak
Energy (non-resettable).
Display segments test. Segments are
flashing.
Press DISPLAY
For continuation of displays refer to Section 3.1.1 Normal Operation.
18 Operation

(1 3. .:K

(1 23.

7(67 
 
$&&80 .:K

$&&80 .:+
⇓ ⇓
⇓ ⇓
⇓