Yokogawa 212 Heat Calculator - Manual (Page 23)

Parameter Value Description
If 4-20mA Output is installed
8. 4-20mA Flow
Pwr
∆
t°
Ft°
Rt°
Defines the parameter to be output as a
4-20mA signal.
9. 4mA xxxx.xxx Flowrate or temperature which
corresponds to 4mA.
10. 20mA xxxx.xxx Flowrate or temperature which
corresponds to 20mA.
12. PULSE Ener
Volu Defines whether the pulse output is for
the energy or volume total.
13. PULSE xxx.x kWh Defines how often a pulse is output
(maximum frequency = 49Hz).
14. COMMS NONE
M-BUS
RS485 No Communications.
Meter-bus (see Section 4).
Modbus RTU.
15. BAUD xxxx Communications baud rate between 300
and 9600.
16. PARITY Even/Odd/None Communications parity.
17. BUS xx ADDR Bus address for the communications link.
Operation 21