Yokogawa PR300 Power and Energy Meter - Manual (Page 5)

iv IM 77C01E01-01E
Checking the Accessories
Mode
l P R300
Pow
er an
d E nergy M
ete r
<Initial S
etup O
per atio ns>
Model P
R300
Pow
er a nd E
ne rgy M
eter
<Installation
>
(1) JIS/ANSI-mounting kit
Bezel
Panel-mounting bolts (2)
Nuts (2)
Flat washers (2)
Spring washers (2)
Bracket-fixing screws (2)
Panel-mounting bracket
(2) DIN-mounting
brackets
(5) Shorting bar
(6) Tag number labels
(7) Startup Manuals (8) Manuals for the PR300 (CD)
(for DIN 96-square
instrument panel
mounting)
(for RS-485 communication
termination)
(3) Dust cover
(with 1 fixing screw)
(Installation/Initial Setup Operations)
(4) Terminal cover
(with 3 fixing screws)
Item Name
(1) JIS/ANSI-mounting kit
(2) DIN-mounting brackets
(3) Dust cover
(4) Terminal cover
(5) Shorting bar
(6) Tag number label
(7) Startup manual
(8) Manuals for the PR300(CD)
Bezel
Panel-mounting bracket
Panel-mounting bolts
Bracket-fixing screws
Flat washers
Spring washers
Nuts
Fixing screw
Fixing screws
Remarks
Used to mount the PR300 according to the ANSI 4-inch round
form size or JIS110-square instrument size.
Used to mount the PR300 according to the DIN 96-square
instrument size.
Attached onto the top of the PR300 main unit.
Attached to the PR300 terminal section. (Must always be
attached to avoid a possible electric shock.)
Used in RS-485 communication if the PR300 is a terminal device.
A quick reference manual for use in initial installation.
This CD contains all manuals related to the PR300.
Qty
1
1
2
2
2
2
2
2
1
1
1
3
1
2
2
1
Checking the Package