6 resetting measured values, Resetting maximum and minimum values, Resetting energy value – Yokogawa PR300 Power and Energy Meter User Manual

Page 51: Measured value reset, Resetting measured values -10

Advertising
background image

4-10

IM 77C01E01-01E

4.6 Resetting Measured Values

Resetting Maximum and Minimum Values

Operation

Operation

Simultaneously hold down

and for at
least 5 seconds.

Measured Value screen

Measured Value screen

Reset Item Selection screen

Reset Item Confirmation screen

1

2

3

Press once.

The Reset Item Selection screen
appears.

The Reset Item Confirmation screen
appears, and the reset items blinks.

The maximum and minimum
values are reset, and the PR300
returns to the Measured Value

“RESET” appears for about 1
second, then a measured value
appears.

(“RESET” will not appear if returning to the screen
not showing the maximum or minimum value after
resetting.)

To return to the Measured
Value screen without resetting,
refer to “Canceling Reset Item
Selection” on the next page.

Reset items

Display the reset items on
the screen (refer to the
figure on the left)

using or

and press

once.

To stop resetting
To change the reset items

Press any key other than while
the reset items are blinking.
The PR300 returns to the Reset Item
Selection screen.

Resetting Energy Value

Operation

Operation

Measured Value screen

Measured Value screen

Reset Item Selection screen

Reset Item Confirmation screen

1

2

3

The Reset Item Selection screen
appears.

The energy value is reset, and
the PR300 returns to the
Measured Value screen.

Reset items

The Reset Item Confirmation screen
appears, and the reset items blinks.

“RESET” appears for about 1
second, then a measured value
appears.

(“RESET” will not appear if returning to the
screen not showing the energy value after
resetting.)

To return to the Measured
Value screen without resetting,
refer to “Canceling Reset Item
Selection” on the next page.

Simultaneously hold down

and for at
least 5 seconds.

Press once.

Display the reset items on
the screen (refer to the
figure on the left)

using or

and press

once.

To stop resetting
To change the reset items

Press any key other than while
the reset items are blinking.
The PR300 returns to the Reset Item
Selection screen.

Advertising