AMX Modero NXT-1200V - Manual (Page 114)

Firmware Pages and Descriptions
102 NXD/T-1200V 12" Modero® Video Wall/Flush Mount Touch Panel
Password Setup Page
The Password Setup page (FIG. 99) centers around the properties used to assign passwords for the Modero
panel pages.
The elements of the Password Setup page are described in the table below:
Calibration Page
This page (FIG. 100) allows you to calibrate the input touch device (touch panel) using the pre-selected touch
driver.
 Press and hold the grey Front Setup Access button (below the Modero LCD) for 6 seconds to access
the Calibration page.
 Press the crosshairs to calibrate the panel and return to the last active firmware page.
The minimum (lower level) of the dimmer should be at least 10% lower than the
minimum detected level (ex: lower dimmer level at 30% if the detected lighting of the
room is at 40%).
FIG. 99 Password Setup page
Password Setup Page Elements
Back: Saves the changes and returns you to the previously active touch panel page.
Connection Status icon: This visual display of the connection status allows the user to have a current visual
update of the panel’s connection status regardless of what page is currently active.
• A Lock only appears on the icon if the panel has established a connection with a
currently secured target Master (requiring a username and password).
In Panel Password
Change: Accesses the alphanumeric values associated to particular password sets.
• PASSWORD 1, 2, 3, 4, 5 (protected) buttons open a keyboard where you can enter
alphanumeric values associated to a selected password group.
• Clearing Password #5 removes the need to enter a password before accessing the
Protected Setup page.
FIG. 100 Calibration page (actually 3 separate screens)
The request to touch the crosshairs
is the first on-screen message
Calibration successful is the second
on-screen message that appears
On-screen crosshairs used for
calibration of the touch device
after the calibration process is
completed