AMX Modero NXT-1200V - Manual (Page 98)

Firmware Pages and Descriptions
86 NXD/T-1200V 12" Modero® Video Wall/Flush Mount Touch Panel
Setup Page
This page (FIG. 84) centers around basic Modero panel properties such as: Connection Status of the panel,
Display Timeout, Inactivity Page Flip Time, Inactivity page file, and the Panel Brightness.
The elements of the Setup page are described in the table below:
Setup Navigation Button Elements (Cont.)
Video Adjustment: Press the Video Adjustment button to access the Video Adjustment page where
you can set the video properties for incoming video.
• This button only appears on Color Video (CV) capable touch panels.
• Refer to the Video Adjustment - Video Adjustment Page section on page 92
for more detailed information.
Battery Base: Press the Battery Base button to access the Battery Base page where you can
modify and monitor NXT-BP Modero Power Pack parameters.
• This button only appears when a Modero Table Top panel (NXT) is connected
to an NXA-BASE/B battery base.
• Refer to the Battery Base Page section on page 93 for more detailed
information.
FIG. 84 Setup page
Setup Page Elements
Exit: Returns you to the Main touch panel page. In this case, the previous page is the
default Main page.
Connection Status icon: This visual display of the connection status allows the user to have a current update
of the panel’s connection status regardless of what page is currently active.
A Lock only appears on the icon if the panel has established a connection with a cur-
rently secured target Master (requiring a username and password).
Connection Status: Displays whether the panel is communicating externally, the encryption status of the
communicating Master, what connection type is being used (Ethernet or USB), and
what System the panel is a part of.
This visual display of the connection status is also reflected at the upper-right of each
firmware page. This allows the user to have a current visual update of the panel’s
connection status regardless of what page is currently active.
• When a connection is established, the message displayed is either: "Connected via
Ethernet " or "Connected via USB ".
• If no connection can be established by the Modero panel, it will continue to try and
establish a connection while displaying: "Attempting via ...".
• The word "Encrypted" appears only when an encrypted connection is established
with a target Master.
• The panel must be rebooted before incorporating any panel communication
changes and detecting any active Ethernet connections.
The Ethernet connection is not detected until after a reboot.
Video Adjustment button doesn’t
appear on Non-Video (CA) panels
Battery Base button doesn’t appear
until NXT is connected to a BASE/B
Connection Status
Red Connection Status icon -
Green Connection Status icon -
indicates no connection to a Master
indicates communication to a Master