Renkus-Heinz ICL-R - Manual (Page 6)

IC L ive Users Manual - Models ICL-R & IC215S-R
6
Assembly
IC Live is a building block system designed for easy transportation,
setup and tear down. It provides for 6 system configurations from two
basic modules, the ICL-R array module and the IC215S-R subwoofer.
Setup couldn’t be easier. To create a stacked array from two ICL-R
modules:
1. Stand the two column arrays side by side and remove the two join-
ing bars and their short quick release pins from the modules.
2. Place one of the modules on top of the other one. Note that the top
module should be turned upside down so the horn sections of the two
modules are together.
3. Align the two modules and then remove the quick release pin from
the upper module’s rear cylinder to allow its inner sleeve to drop
down into the lower module’s rear cylinder.
4. Then re-insert the quick release pin into the upper module’s cylin-
der to lock the inner sleeve in place.