Renkus-Heinz ICL-R - Manual (Page 9)

IC L ive Users Manual - Models ICL-R & IC215S-R
9
System Wiring With PC Control
Notice that no Ethernet switch is needed in single array setups. Instead, only a simple Ethernet Crossover cable is required.
An Ethernet switch is needed only when there are two or more devices, such as an array and a subwoofer. A stacked array is treated as a
single device since it performs as one even though it has two modules.
Satisfactory 100 BaseT Ethernet switches of many sizes (output ports) are available from a number of sources. Unmanaged switches are
adequate for most applications. Managed switches are not required.
Systems using CobraNet digital audio distribution require either a suitable analog to CobraNet converter or a mixing console with a Co-
braNet output. Suitable analog to CobraNet converters are available from a number of sources, such as Bi-Amp, Peavey and others. The
converter’s output would plug into one of the Ethernet switch ports.
Single
ICL-R Array Setup
with Computer Control
Stacked (Dual)
ICL-R Array Setup
With Computer Control
Stacked (Dual) ICL-R Array
and
Dual IC215S-R Subwoofer Setup
with Computer Control