Brocade Unified IP MIB Reference (Supporting FastIron Release 07.5.00) - Manual (Page 248)

220 Unified IP MIB Reference
53-1002549-02
CAM usage session table
CAM usage session table
The following table contains information about the CAM usage on the device by sessions traffic.
snCamUsageL2Type
brcdIp.1.14.1.1.2.2.1.3
Syntax: Integer None Identifies the type of Layer 2 traffic passing through the network
processor:
•
forwarding(1)
•
protocol(2)
•
flooding(3)
•
total(4)
snCamUsageL2Size
brcdIp.1.14.1.1.2.2.1.4
Syntax: Unsigned32 None Indicates the effective CAM size for this Layer 2 traffic entry. Each unit
is 8 bytes.
snCamUsageL2Free
brcdIp.1.14.1.1.2.2.1.5
Syntax: Gauge32 Read-only Shows the amount of CAM currently available for this Layer 2 traffic.
Each unit is 8 bytes.
snCamUsageL2UsedPercen
t
brcdIp.1.14.1.1.2.2.1.6
Syntax: Percent Read-only Shows the percentage of CAM currently being used for this Layer 2
traffic.
Name, OID, and syntax Access Description
Name, OID, and syntax Access Description
snCamUsageSessionTable
brcdIp.1.14.1.1.2.3 None The CAM usage table for Layer 3 traffic.
snCamUsageSessionSlot
brcdIp.1.14.1.1.2.3.1.1
Syntax: Unsigned32 None A number that uniquely identifies an interface module on the
device.
snCamUsageSessionProcessor
brcdIp.1.14.1.1.2.3.1.2
Syntax: Unsigned32 None A number which uniquely identifies the network processor on
the interface module identified by the
“snCamUsageSessionSlot” object.
snCamUsageSessionType
brcdIp.1.14.1.1.2.3.1.3
Syntax: Integer None Identifies the type of session:
•
ipv4Multicast(1)
•
ipv4andMacReceiveAcl(2)
•
ipv4andMacRuleAcl(3)
•
ipv4andMacTotal(4)
•
ipv4andMacOut(5)
•
ipv6Multicast(6)
•
ipv6ReceiveAcl(7)
•
ipv6RuleAcl(8)
•
ipv6Total(9)
•
ipv6Out(10)
•
labelOut(11)
•
ipv4SrcGuardDenial(12)
•
ipv4SrcGuardPermit(13)
•
internalForwardingLookup(14)