Mef service oam notifications, Vrrp traps, Sntrapvrrpifstatechange – Brocade Unified IP MIB Reference (Supporting FastIron Release 07.5.00) User Manual

Page 721: Fsrp traps, Sntrapfsrpifstatechange

Advertising
background image

Unified IP MIB Reference

693

53-1002549-02

Proprietary traps

MEF Service OAM notifications

The following are the Metro Ethernet Forum (MEF) Service OAM (SOAM) traps.

NOTE

The following traps are supported on the Brocade NetIron MLX, Brocade MLXe, Brocade NetIron
XMR, Brocade NetIron CES, and Brocade NetIron CER series devices.

VRRP traps

The following table contains VRRP trap that can be used only by the devices that support VRRP.

FSRP traps

The following traps can be used by the devices that support FSRP.

Trap name and
number

Supported?

Varbind

Description

mefSoamDmSe
ssionStartStop
1.3.6.1.4.1.150
07.1.3.0.3

Yes

mefSoamDmCfgSession
Status,
mefSoamNotificationDa
teAndTime

Generated when the state of the delay measurement
(DM) session changes.
The notification is sent when the DM session is started
and stopped.
Sample trap message:
DOT1AG: The CFM session started for MA

index 1, MD index 1, MEP id 1

mefSoamDmThr
esholdCrossing
1.3.6.1.4.1.150
07.1.3.0.5

Yes

mefSoamThresholdNotif
icationId,
mefSoamThresholdNotif
icationCfg,
mefSoamThresholdNotif
icationCount,
mefSoamThresholdSus
pect,
mefSoamNotificationDa
teAndTime

Generated when the value of the crossing object from
the mefSoamDmThresholdTable (as indicated by the
mefSoamThresholdNotificationId) is exceeded during
the current measurement interval.
The notification is sent when the threshold crosses as
per mefSoamDmThresholdCrossing.
Sample trap message:
DOT1AG: The CFM session for MA index 1,

MD index 1, MEP id 1 has crossed the

maximum threshold value

Trap name and number

Varbinds

Severity

Description and trap message

snTrapVrrpIfStateChange
brcdIp.0.34

snAgGblTrapMessage Warning

A VRRP routing device changed state from
master to backup or vice versa.
Sample trap message:
VRRP intf state changed, intf

<port>, vrid <id>, state

<new-state>.

Trap name and number

Varbinds

Severity

Description and trap message

snTrapFsrpIfStateChange
brcdIp.0.33

snAgGblTrapMessage Informational

An FSRP routing device changed state from
active to standby or vice versa.
Sample trap message:
SRP_FSRP intf state changed,

intf <port>, addr <ip>, state

<new-state>.

Advertising