Brocade Unified IP MIB Reference (Supporting FastIron Release 07.5.00) - Manual (Page 646)

618 Unified IP MIB Reference
53-1002549-02
BFD session mapping table
BFD session mapping table
The BFD session mapping table maps the complex indexing of the BFD sessions to the flat
BFDIndex used in the BfdSessionTable.
bfdSessPerfPktOut
brcdIp.3.3.1.1.3.1.2
Syntax: Counter32 Read-only The total number of BFD messages sent for this BFD session.
bfdSessPerfUpTime
brcdIp.3.3.1.1.3.1.3
Syntax: TimeStamp Read-only The value of sysUpTime on the most recent occasion at which the
session came up. If no such up event exists, this object contains
a zero value.
bfdSessPerfLastSessDownTi
me
brcdIp.3.3.1.1.3.1.4
Syntax: TimeStamp Read-only The value of sysUpTime on the most recent occasion at which the
last time communication was lost with the neighbor. If no such
down event exists, this object contains a zero value.
bfdSessPerfLastCommLostDi
ag
brcdIp.3.3.1.1.3.1.5
Syntax: BfdDiag Read-only The BFD diag code for the last time communication was lost with
the neighbor. If no such down event exists, this object contains a
zero value.
bfdSessPerfSessUpCount
brcdIp.3.3.1.1.3.1.6
Syntax: Counter32 Read-only The number of times this session has gone into the up state since
the router last rebooted.
bfdSessPerfDiscTime
brcdIp.3.3.1.1.3.1.7
Syntax: TimeStamp Read-only The value of sysUpTime on the most recent occasion at which any
one or more of the session counters suffered a discontinuity. The
relevant counters are the specific instances associated with this
BFD session of any Counter32 object contained in
BfdSessPerfTable. If no such discontinuities have occurred since
the last re-initialization of the local management subsystem, then
this object contains a zero value.
bfdSessPerfPktInHC
brcdIp.3.3.1.1.3.1.8
Syntax: Counter64 Read-only This value represents the total number of BFD messages
received for this BFD session. It must be equal to the least
significant 32 bits of bfdSessPerfPktIn if bfdSessPerfPktInHC is
supported according to the rules spelled out in RFC 2863.
bfdSessPerfPktOutHC
brcdIp.3.3.1.1.3.1.9
Syntax: Counter64 Read-only This value represents the total number of BFD messages
transmitted for this BFD session. It must be equal to the least
significant 32 bits of bfdSessPerfPktIn if bfdSessPerfPktOutHC is
supported according to the rules spelled out in RFC 2863.
Name, OID, and syntax Access Description
Name, OID, and syntax Access Description
BfdSessMapTable
brcdIp.3.3.1.1.4 None The BFD session mapping table.
NOTE: If the value of the bfdSessAddr (an OID) has more that
111 sub-identifiers, then OIDs of column instances in this
table will have more than 128 sub-identifiers and cannot
be accessed using SNMPv1, SNMPv2c, or SNMPv3.
bfdSessMapBfdIndex
brcdIp.3.3.1.1.4.1.1
Syntax: Unsigned32 Read-only Specifies the BFD index referred to by the indexes of this row. In
essence, a mapping is provided between these indexes and the
BFD session table.