Brocade Unified IP MIB Reference (Supporting FastIron Release 07.5.00) - Manual (Page 296)

268 Unified IP MIB Reference
53-1002549-02
Stacking operation unit table
snStackingOperUnitPriority
brcdIp.1.1.3.31.2.2.1.4
Syntax: Integer32 Read-only The priority in active or backup election. Values can be from 0
through 255.
snStackingOperUnitState
brcdIp.1.1.3.31.2.2.1.5
Syntax: Integer Read-only The state of the unit
•
local(1)
•
remote(2)
•
reserved(3)
•
empty(4)
snStackingOperUnitDescription
brcdIp.1.1.3.31.2.2.1.6
Syntax: DisplayString Read-only Describes the stacking state of the unit. This object can display
up to 128 characters.
snStackingOperUnitStackPort1
brcdIp.1.1.3.31.2.2.1.7
Syntax: InterfaceIndex or zero Read-only First stack port for the unit. It returns 0 if the stack port does not
exist.
snStackingOperUnitStackPort1St
ate
brcdIp.1.1.3.31.2.2.1.8
Syntax: Integer Read-only The state of the first stack port state of a unit:
•
other(1)
•
up(2)
•
down(3)
snStackingOperUnitStackPort2
brcdIp.1.1.3.31.2.2.1.9
Syntax: InterfaceIndex or zero Read-only Second stack port of a unit. It returns 0 if the stack port does not
exist.
snStackingOperUnitStackPort2St
ate
brcdIp.1.1.3.31.2.2.1.10
Syntax: Integer Read-only The state of the second stack port state of a unit:
•
other(1)
•
up(2)
•
down(3)
snStackingOperUnitNeighbor1
brcdIp.1.1.3.31.2.2.1.11
Syntax: Integer32 Read-only The first stacking neighbor unit (left) number. If there is no
neighbor unit, then it returns 0.
snStackingOperUnitNeighbor2
brcdIp.1.1.3.31.2.2.1.12
Syntax: Integer32 Read-only The second stacking neighbor unit (right) number. If there is no
neighbor unit, then it returns 0.
snStackingOperUnitImgVer
brcdIp.1.1.3.31.2.2.1.13
Syntax: DisplayString Read-only The version of the software image running on the unit. This
object can have up to 32 characters.
snStackingOperUnitBuildlVer
brcdIp.1.1.3.31.2.2.1.14
Syntax: DisplayString Read-only The version of the software build running on the unit. This object
can have up to 32 characters.
Name, OID, and syntax Access Description