Brocade Unified IP MIB Reference (Supporting FastIron Release 07.5.00) - Manual (Page 446)

418 Unified IP MIB Reference
53-1002549-02
VRRP and VRRP-E virtual router configuration table
snVrrpVirRtr2RowStatus
brcdIp.1.2.12.5.1.1.13
Syntax: Integer Read-write Controls the management of the table rows. The following values can
be written:
•
delete(3) – Delete the row.
•
create(4) – Create a new row.
•
modify(5) – Modify an existing row.
If the row exists, then a SET with a value of create(4) returns a
"bad value" error. Deleted rows are removed from the table
immediately.
The following values can be returned on reads:
•
noSuch(0) – No such row.
•
invalid(1) – Row is inoperative.
•
valid(2) – Row exists and is valid.
snVrrpVirRtr2RxArpPktD
ropCnts
brcdIp.1.2.12.5.1.1.14
Syntax: Counter32 Read-only The received VRRP and VRRP-E ARP packet drop counts.
snVrrpVirRtr2RxIpPktDr
opCnts
brcdIp.1.2.12.5.1.1.15
Syntax: Counter32 Read-only Shows the number of IP packets addressed to the interface that were
dropped.
snVrrpVirRtr2RxPortMis
matchCnts
brcdIp.1.2.12.5.1.1.16
Syntax: Counter32 Read-only Shows the number of packets received that did not match the
configuration for the receiving interface.
snVrrpVirRtr2RxNumOfI
pMismatchCnts
brcdIp.1.2.12.5.1.1.17
Syntax: Counter32 Read-only Shows the number of packets received that did not match the
configured IP addresses.
snVrrpVirRtr2RxIpMism
atchCnts
brcdIp.1.2.12.5.1.1.18
Syntax: Counter32 Read-only Shows the number of VRRP IP addresses received that did not match
the VRRP or VRRP-E addresses.
snVrrpVirRtr2RxHelloInt
MismatchCnts
brcdIp.1.2.12.5.1.1.19
Syntax: Counter32 Read-only Shows the number of packets received that did not match the
configured hello interval.
snVrrpVirRtr2RxPriorityZ
eroFromMasterCnts
brcdIp.1.2.12.5.1.1.20
Syntax: Counter32 Read-only Shows the count of the virtual router interfaces that received priority
zero from the master.
snVrrpVirRtr2RxHigherP
riorityCnts
brcdIp.1.2.12.5.1.1.21
Syntax: Counter32 Read-only Shows the number of packets received by the interface that had a
higher backup priority for the VRID than this interface’s backup priority
for the VRID.
snVrrpVirRtr2TransToMa
sterStateCnts
brcdIp.1.2.12.5.1.1.22
Syntax: Counter32 Read-only Shows the number of times this interface has changed from the
master state to the backup state for the VRID.
Name, OID, and syntax Access Description