Brocade Unified IP MIB Reference (Supporting FastIron Release 07.5.00) - Manual (Page 405)

Unified IP MIB Reference 377
53-1002549-02
TM unicast VOQ statistics table
TM unicast VOQ statistics table
The Traffic Manager(TM) unicast Virtual Output Queue (VOQ) statistics table contains information
about the TM unicast VOQ-related statistics. Use the show tm-voq-stat src_port [ethernet | pos]
<slot/port> dst_port [ethernet | pos] <slot/port> [<priority> | all] command for information about
the TM unicast queue-related statistics.
NOTE
The following table contains information about the TM unicast queue-related statistics on the
NI-MLX-1Gx48-T, NI-MLX-1Gx24, NI-MLX-10Gx8, BR-MLX-100Gx2, and all the POS modules.
brcdTMDestUcastQStatDequeP
kts
brcdIp.1.14.2.1.2.8.1.5
Syntax: Counter64 Read-only The total aggregated count of the packets that are dequeued or
transmitted from an ingress queue across the TMs.
brcdTMDestUcastQStatDequeB
ytes
brcdIp.1.14.2.1.2.8.1.6
Syntax: Counter64 Read-only The total aggregated count of the bytes that are dequeued or
transmitted from an ingress queue across the TMs.
brcdTMDestUcastQStatTotalQDi
scardPkts
brcdIp.1.14.2.1.2.8.1.7
Syntax: Counter64 Read-only For a VOQ, the total aggregated count across all the packets of
TMs is discarded due to one of the following reasons:
•
Before enqueuing, caused by WRED
•
When the maximum queue depth is reached
•
After enqueuing but before dequeuing, caused by aging
brcdTMDestUcastQStatTotalQDi
scardBytes
brcdIp.1.14.2.1.2.8.1.8
Syntax: Counter64 Read-only For a VOQ, the total aggregated count across all the bytes of TMs
is discarded due to one of the following reasons:
•
Before enqueuing, caused by WRED
•
When the maximum queue depth is reached
•
After enqueuing but before dequeuing, caused by aging
Name, OID, and syntax Access Description
Name, OID, and syntax Access Description
brcdTMUcastQStatsTable
brcdIp.1.14.2.2.3 None The TM unicast VOQ statistics table.
brcdTMUcastQStatsSlotId
brcdIp.1.14.2.2.3.1.1
Syntax: Unsigned32 None Shows the slot ID of the LP module that uniquely
identifies a line card. The LP module must be physically
present and operationally up.
brcdTMUcastQStatsTMDeviceId
brcdIp.1.14.2.2.3.1.2
Syntax: Unsigned32 None Shows the TM device ID that uniquely identifies the
Network Processor TM within a line card in the system.
brcdTMUcastQStatsDstIfIndex
brcdIp.1.14.2.2.3.1.3
Syntax: InterfaceIndex None Shows the destination interface index. This is applicable
only for the interface on the LP module that is physically
present and operationally up.