Brocade DCX 8510-8 Backbone Hardware Reference Manual - Manual (Page 92)

FIGURE 24 Removal and replacement of the core switch blade (CR16-8)
Replacing a core switch blade (CR16-8)
Follow electrostatic discharge (ESD) precautions when replacing a blade. Wear a wrist grounding
strap connected to chassis ground (if the Brocade DCX 8510-8 is plugged in) or a bench ground.
DANGER
For safety reasons, the ESD wrist strap should contain a series 1 megaohm resistor.
NOTE
The CR16-8 blade is compatible only with the Brocade DCX 8510-8.
Replacing a core switch blade (CR16-8)
92 Brocade DCX 8510-8 Backbone Hardware Reference Manual
53-1002180-07