Brocade Mobility 7131 Installation Guide - Dependent Mode (Supporting software release 4.1.0.0 and later) - Manual (Page 21)

Mounting the Mobility 7131
2
Brocade Mobility 7131 Installation Guide - Dependent Mode 13
53-1001567-04
d. Attach the power adapter cable into the power connector on the Mobility
7131.
e. Attach the power supply line cord to a power supply.
CAUTION
Do not actually connect to the power source until the cabling portion of
the installation is complete.
5. Verify the behavior of the Mobility 7131 LEDs. For more information, see “LED
indicators” on page 18.
6. Align the bottom of the ceiling T-bar with the back of the Mobility 7131.
7. Orient the Mobility 7131 chassis by its length and the length of the ceiling T-bar.
8. Rotate the Mobility 7131 chassis 45 degrees clockwise.
9. Push the back of the Mobility 7131 chassis on to the bottom of the ceiling T-bar.
10. Rotate the Mobility 7131 chassis 45 degrees counter-clockwise.
The clips click as they fasten to the T-bar.