Brocade Mobility 7131 Installation Guide - Dependent Mode (Supporting software release 4.1.0.0 and later) - Manual (Page 28)

LED indicators
2
20 Brocade Mobility 7131 Installation Guide - Dependent Mode
53-1001567-04
Single radio 5 GHz Mobility 7131 LEDs
The single 5 GHz radio model Mobility 7131 has the following unique LED behavior:
Rear Mobility 7131 LED
The LED on the rear (bottom) of the Mobility 7131 is viewed using a single
(customer installed) extended light pipe, adjusted as required to suit above the
ceiling installations. A LED displayed using the light pipe has the following display
and functionality:
LED 1 LED 2 LED 3 LED 4 - 5 GHz LED 5 - 2.4 GHz LED 6
Blinking Red
indicates
booting.
Solid Red
defines a
failure
condition.
White defines
normal
operation Green defines
normal GE1
operation.
Yellow defines
a collision Green defines
normal GE2
operation.
Yellow defines
a collision Amber
defines 5 GHz
radio as
configured.
When
functioning as
a
sensor, LED
alternates
between
Amber and
Yellow. The
blink interval
is 0.5
seconds. Off Not Used
LED 7
Blinking Red indicates booting. Solid Red defines a failure condition.
White defines normal operation.