Brocade Mobility 7131 Installation Guide - Dependent Mode (Supporting software release 4.1.0.0 and later) User Manual
Page 42
Where to go from here?
3
34
Brocade Mobility 7131 Installation Guide - Dependent Mode
53-1001567-04
•
Refer to Chapter 4 to define System Settings (beyond the scope of the Quick
Setup screen), configure Mobility 7131 device access, set SNMP values, log
system events, set the Mobility 7131 system time and import device firmware
and configuration files.
•
See Chapter 5 for information on configuring the Mobility 7131 LAN and WAN
ports, define up to 16 individual WLANs and their QoS policies and configure
Mobility 7131 router settings.
•
Refer to Chapter 6 for information on configuring specific encryption (WEP,
KeyGuard, WPA/TKIP and WPA2/CCMP) and authentication (Kerberos and
802.1x EAP) security schemes.
•
See Chapter 7 for information on accessing statistics helpful in monitoring the
connection between the Mobility 7131 and its connected devices.
•
Refer to Chapter 8 for information on using the Mobility 7131 Command Line
Interface (CLI), as accessed through the serial port or Telnet.
•
See Appendix A for device specifications.