Brocade Network Advisor IP User Manual v12.1.0 - Manual (Page 1433)

Brocade Network Advisor IP User Manual 1379
53-1002947-01
CLI Templates
G
TABLE 28 MCT Cluster Creation
Feature Description CLI Commands
MCT Create a session VLAN. vlan $<SESSION_VLAN|INTEGER> name Session-VLAN
tagged ethernet $<SESSION_VLAN_PORT|SLOT_PORT>
router-interface ve $<SESSION_VE_INTERFACE|INTEGER>
interface ve $<SESSION_VE_INTERFACE|INTEGER>
ip address $<SESSION_VE_INTERFACE_IP|STRING>
MCT Create a keep–alive VLAN. vlan $<KEEP_ALIVE_VLAN|INTEGER> name MCT-keep-alive
tagged ethernet $<KEEP_ALIVE_VLAN_PORT|SLOT_PORT>
MCT Create cluster configuration. cluster $<CLUSTER_NAME|STRING> $<CLUSTER_ID|INTEGER>
rbridge-id $<RBRIDGE_ID|INTEGER>
session-vlan $<SESSION_VLAN|INTEGER>
keep-alive-vlan $<KEEP_ALIVE_VLAN|INTEGER>
icl $<ICL_NAME|STRING> ethernet $<ICL_PORT|SLOT_PORT>
peer $<PEER_SESSION_VE_INTERFACE_IP|STRING>
rbridge-id $<PEER_RBRIDGE_ID|INTEGER>
icl $<ICL_NAME|STRING>
MCT Specify single VLAN ID or range
<DECIMAL> [to <DECIMAL>]. member-vlan $<MEMBER_VLANS|STRING>
NOTE: ICL ports should also be added to MCT Member VLANs.
TABLE 29 MCT Cluster Deployment
Feature Description CLI Commands
MCT Deploy cluster. cluster $<CLUSTER_NAME|STRING> $<CLUSTER_ID|INTEGER>
deploy
TABLE 30 MCT Cluster Undeployment
Feature Description CLI Commands
MCT Undeploy cluster. cluster $<CLUSTER_NAME|STRING> $<CLUSTER_ID|INTEGER>
undeploy
TABLE 31 MCT Cluster Deletion
Feature Description CLI Commands
MCT Delete cluster. no cluster $<CLUSTER_NAME|STRING>
$<CLUSTER_ID|INTEGER>
no vlan $<SESSION_VLAN|INTEGER>
no vlan $<KEEP_ALIVE_VLAN|INTEGER>
TABLE 32 MCT Client Creation
Feature Description CLI Commands
MCT Create a cluster client. cluster $<CLUSTER_NAME|STRING> $<CLUSTER_ID|INTEGER>
client $<CLIENT_NAME|STRING>
rbridge-id $<CLIENT_RBRIDGE_ID|INTEGER>
client-interface ethernet $<CLIENT_PORT|SLOT_PORT>
deploy