Brocade Network Advisor IP User Manual v12.1.0 User Manual
Page 302
248
Brocade Network Advisor IP User Manual
53-1002947-01
Performance monitors
8
•
Connected_Port_Link (where Connected_Port_Link is Connected Port, Initiator, or Target) —
Displays one of the following:
-
Connected Port — The ISL or IFL port on the connected device. Click to launch the switch
port properties dialog box.
-
Initiator — The initiator port on the connected device. Click to launch the device properties
dialog box.
-
Target — The target port on the connected device. Click to launch the device properties
dialog box.
•
Alignment Errors— The number (error count) of alignment errors for the duration specified in
the monitor.
•
Alignment Errors/sec — The number (error rate) of alignment errors per second for the duration
specified in the monitor.
•
Product — The product affected by this monitor.
•
Type — The type of port (for example, U-Port).
•
Identifier — The port identifier.
•
Port Number — The port number.
•
State — The port state (for example, Enabled).
•
Status — The port status (for example, Up).
•
Refreshed — The time of the last update for the monitor.
To edit a port performance monitor, refer to
“Editing a preconfigured performance monitor”
Accessing additional data from top or bottom port monitors
•
Double-click a row or right-click a row and select Show Graph/Table to navigate to the Historical
Graphs/Tables dialog box for the selected measures. For more information, refer to