Brocade Network Advisor IP User Manual v12.1.0 - Manual (Page 317)

Brocade Network Advisor IP User Manual 263
53-1002947-01
Performance monitors
8
• Connected_Port_Link (where Connected_Port_Link is Connected Port, Initiator, or Target) —
Displays one of the following:
- Connected Port — The ISL or IFL port on the connected device. Click to launch the switch
port properties dialog box.
- Initiator — The initiator port on the connected device. Click to launch the device properties
dialog box.
- Target — The target port on the connected device. Click to launch the device properties
dialog box.
• Underflow Errors— The number (error count) of underflow errors for the duration specified in
the monitor.
• Underflow Errors/sec — The number (error rate) of underflow errors per second for the duration
specified in the monitor.
• Product — The product affected by this monitor.
• Type — The type of port (for example, U-Port).
• Identifier — The port identifier.
• Port Number — The port number.
• State — The port state (for example, Enabled).
• Status — The port status (for example, Up).
• Refreshed — The time of the last update for the monitor.
To edit a port performance monitor, refer to “Editing a preconfigured performance monitor” on
page 272.
Top Port Utilization Percentage monitor
The Top Port Utilization monitor ( Figure 102 ) displays the top port utilization percentages in a table.
FIGURE 102 Top Port Utilization monitor
The Top Port Utilization monitor includes the following data:
• Severity icon/monitor title — The worst severity of the data shown next to the monitor title.
• Port — The port affected by this monitor.