Brocade Network Advisor IP User Manual v12.1.0 - Manual (Page 484)

430 Brocade Network Advisor IP User Manual
53-1002947-01
Ports
14
Ports
NOTE
Only available for Fabric OS products.
You can enable and disable ports, as well as view port details, properties, type, status, and
connectivity.
Viewing port connectivity
The connected switch and switch port information displays for all ports.
To view port connectivity, choose one of the following steps:
• Right-click a Fabric and select Port Connectivity.
• Right-click a product icon and select Port Connectivity.
• Select a product icon and select Monitor > Port Connectivity.
The Port Connectivity View dialog box displays ( Figure 155 ).
FIGURE 155 Port Connectivity View dialog box
The following details the information located (in default order) on the Port Connectivity View dialog
box.
• Fabric / Switch Name — If launched from a fabric, displays the fabric name. If launched from a
switch, displays the fabric name and the switch name.
• Filter check box / link — Select to filter results (refer to “Filtering port connectivity” on
page 433) in the Port Connectivity View dialog box.
• un-named list — Select to view port connectivity for all switches in the fabric or a specific
switch. Default selection is All Switches.