Davey Speedman Compact Constant Water Pressure Systems - Manual (Page 10)

10
• Speedman Compact controller will display the pre-set operating pressure.
3.5 Bar
ACTIVE ..........
To check direction of rotation for motor
– Note: this is factory set already.
Check the correct sense of rotation of the pump. If you want to change:
• Press key + for about 5 seconds.
• With key ➔ go to the parameter Rotation Sense.
• With key + and - set the value desired for rotation sense (0000 or 0001)
• Press ENTER, and keep pressed till it displays “Done..........”
Rotation Sense
0001
Save & Exit with ENTER
• Press ENTER, and keep pressed till it displays “Done..........”
• Saving Parameter and DONE displayed. All parameters are saved in
permanent memory.
Save & Exit
With ENTER