Davey Speedman Compact Constant Water Pressure Systems - Manual (Page 9)

9
System Pressure
• Press + or - to change the value (from 1.00 to 7.50). Note: this has been
factory set at 2.5 Bar.
• Insert the value for desired pressure of the system.
• Press ENTER, and keep pressed till it displays “Done..........”
System Pressure
3.5 Bar
System Start
• Press + or - to change the value (ON/OFF).
ON to activate the system.
OFF not to activate the system.
• Press ENTER, and keep pressed till it displays “Done..........”
System Start
OFF
Save & Exit with ENTER
• Press ENTER, and keep pressed till it displays “Done..........”
• Saving Parameter and DONE displayed. All parameters are saved in
permanent memory.
Save & Exit
With ENTER
Warnings: If System Start = ON, Speedman Compact controller
will immediately power the pump motor!