Lincoln Electric IM635 RED-D-ARC GX 271Chopper LPG - Manual (Page 27)

C-1 ACCESSORIES C-1
GENERAL OPTIONS /
ACCESSORIES
The following options/accessories are available for
your GX 271:
K886-1 Canvas Cover - To protect the GX 271 when
it is not being operated. Made from attractive red can-
vas material that is flame retardant, mildew resistant
and water repellent.
K933-1 Four Wheel Undercarriage - Allows move-
ment of the GX 271 by hand without lifting on smooth
surfaces. Includes two rugged, hard molded wheels
and two durable pneumatic tires. The spring loaded
handle provides convenient, comfortable steering.
The K934-1 Bracket is available for mounting a gas
cylinder on the undercarriage.
K934-1 Bracket for Mounting a Gas Cylinder to a
K933-1 Undercarriage -
Easily mounts on the back of
the K933-1 Four Wheel Undercarriage to carry a weld-
ing gas cylinder.
K934-2 Bracket for Mounting a Welding Gas
Cylinder and a LPG Fuel Cylinder to a K933-1
Undercarriage -
Easily mounts on the back of the
K933-1 Four Wheel Undercarriage to carry both a
welding gas cylinder and a lift truck type LPG fuel
cylinder with a capacity of 33.5 lbs. or 43.5 lbs. of fuel.
K703 Accessory Kit - Includes the following:
- Thirty-five feet (10.5 meters) of # 1/0 AWG elec-
trode cable.
- Thirty feet (9.1 meters) of # 1/0 AWG work cable.
- Headshield with No. 12 filter.
- GC500 work clamp.
- Cooltong® 300 insulated electrode holder.
K802-R Power Plug Kit - Provides four 15 amp, 120
volt plugs and one 50 amp, dual voltage 120/240V, full
kVA plug.
K857 Remote Control - Includes a control box with
25 feet (7.5 meters) of 4-conductor cable. Allows out-
put voltage to be controlled remotely.
K857-1 Remote Control - Includes a control box with
100 feet (30.5 meters) of 4-conductor cable. Allows
output voltage to be controlled remotely.
K896-1 GFCI Receptacle Kit - Includes two UL
approved 120 volt ground fault circuit interrupter
receptacles (duplex type) with covers and installation
instructions. Each receptacle is rated 15 amps, but
the maximum total current from each GFCI duplex is
limited to 20 amps. The GFCI receptacles replace the
two factory installed 120 volt duplex receptacles.
TIG WELDING OPTIONS /
ACCESSORIES
K930-1 TIG Module - The TIG Module is an accesso-
ry that provides high frequency and shielding gas con-
trol for AC and DC GTAW (TIG) welding applications.
It provides contactor control of constant current weld-
ing power sources having an internal contactor. The
TIG Module is supplied without accessories, Arc Start
switches, Amptrols, cables, torches and mounting
brackets must be purchased separately.
K939-1 Docking Kit - For mounting the K930-1 TIG
Module on top of the GX 271.
K936-1 Control Cable - Control cable for connecting
the K930-1 TIG Module to a GX 271.
K814 Arc Start Switch - A remote start switch used
in conjunction with the K930-1 TIG Module to energize
the GX 271 output terminals via the TIG module.
K963 Hand Amptrol - Remote output control and
contactor control.
K870 Foot Amptrol - Remote output control and con-
tactor control.
GX 271 Chopper LPG