LumaSense Technologies IGA 320/23-LO - Manual (Page 26)

IGA 320/23-LO Operating Manual Software InfraWin 26
5.4 Basic settings
All preset values for the device
can be displayed and
modified, if necessary,
through the pyrometer parameters of
the Devices/Parameters window.
Changing an existing pyrometer
setting can be accomplished by typing
a value in an input box or by selecting
a preset value from the list field.
Choose the correct settings for your
application from the displayed
options.
This window contains the parameter
settings described in Chapter
4 ,
Parameters.
5.4.1 Open/Save
The open and save buttons enable you to save customized configurations, which
can then be opened and reused at any time.
5.4.2 1 measur…
The 1 measur… function shows the current measuring temperature in the
pyrometer parameters window for approximately 1 second.
5.4.3 Print
The print icon will generate a screenshot of the parameter form and allow you to
send it a printer.
5.4.4 Close
The close icon will close the pyrometer parameters window.
5.4.5 Test
Clicking on the Test
icon will open a
window that allows you to
directly communicate with the
pyrometer using the UPP
(Universal Pyrometer Protocol)
Data Format commands.
After entering an interface
command (00 is the adjusted
address ex works, ms is the
command reading
temperature value) and
clicking on Send, the window
shown to the right will be
opened.
This window already shows the answer of the pyrometer in 1/10°. The actual temperature
reading is 443.2 °C.
Len indicates the length of the answered data string, incl. Carriage Return (Chr(13)).