LumaSense Technologies IGA 320/23-LO - Manual (Page 9)

IGA 320/23-LO Operating Manual Contents 9
2 Introduction
2.1 Appropriate use
The IGA 320/23-LO is a short wave infrared temperature measuring device with digital signal
processing. It is used for non-contact temperature measurements on metals, ceramics, graphite,
etc. with a temperature range between 100 and 1200 °C.
2.2 Scope of delivery
Pyrometer IGA 320/23-LO, PC adjustment and evaluation software “InfraWin”, inspection sheet,
manual. Fiber, one selectable optical head.
Note: A connection cable is not included with the instrument and has to be ordered
separately (see Chapter
9 , Reference numbers).
2.3 System Overview
The IGA 320/23-LO is a short wavelength infrared measuring instrument with fiber optics and
internal digital signal processing capabilities. This pyrometer is used for measurements of
metallic surfaces, graphite and ceramics, etc.
For optimal match of the instrument to the application, two different optical heads are
available. The small dimensions of the optics allow easy integration into compact production
machines. The instrument is equipped with a fiber and an exchangeable optical head. The fiber
and optical head are unaffected by electromagnetic interferences (e.g. induction) and can be
used in high ambient temperatures up to 200 °C without additional cooling.
The LED targeting light enables precise alignment on the measurement object. It is
automatically active and can be used during measurement. In addition to the analog output, the
pyrometer is equipped with a digital RS485 interface, which enables secure data transmission to
a PC or a PLC over long distances.
The included InfraWin software enables graphical display and storage of measurement values,
as well as easy set-up of all instrument parameters.