Spectra Precision Survey Pro v4.5 Ranger Reference Manual - Manual (Page 102)

Survey Pro Reference Manual
R-94
Settings
Job Settings .
The Settings screen opens several individual screens that control all
hardware and software settings. The screens are provided in an
index card format.
Note: Only the cards that are available when running in GPS Mode
with the GPS module are covered in this section. For details on cards
shared by both GPS Mode and Conventional Mode, refer to Page R-
36.
Receiver Settings
Job Settings Receiver or
Connect to Receiver Receiver Settings
The Receiver Settings card is used to select and activate GPS
receivers, as well as modify or create a receiver’s settings parameters.
The upper portion of the first Receiver Settings
screen lists the names of all the receiver
profiles on the data collector. The other
columns list the COM Port, Brand, and Model of
the receiver defined in each profile.
Demo Mode: is a special profile that cannot be
deleted or edited. When activated, Survey Pro
is put into Demo Mode which can be used to
simulate GPS measurements. This mode is
used for training and demonstration purposes.
Receiver Settings…: opens the Receiver Setup
screen where you can set the parameters for communication from
data collector to receiver, as well as access the Rx Settings screens
where you can configure the receiver settings.