Spectra Precision Survey Pro v4.5 Ranger Reference Manual - Manual (Page 411)

Roads Menu
R-403
Edit Alignments
Roads Edit Alignments or
Job Edit Alignments .
The Edit Alignments screen is used to create an alignment that
defines the centerline of a road containing both horizontal and
vertical elements. Editing alignments is fully described, starting on
Page R-68.
Add/Edit Roads
Roads Edit Roads .
The Add/Edit Roads screen is used to define your road. This is where
the templates are added to the alignment and any widenings and
super elevations are defined.
All existing roads are listed in this screen. If an existing road is
selected, the overhead and profile view of that road are also
displayed.
New… : Opens the New Road screen where a
new road can be defined.
Edit… : Opens the Edit Road screen where the
selected road can be edited. The Edit Road
screen is identical to the New Road screen.
Delete… : Opens the following prompts to
delete the selected road(s).
• Are you sure you want to delete the
selected Roads?: Answering Yes to
this prompt will disassociate the
selected road(s) from the current job so they are no longer
displayed in the Add/Edit Roads screen. In this case, the road
can still be re-associated with the Import… routine.
Answering No to this prompt will return you to the Add/Edit
Roads screen without making any changes.