Triton ARGO User Manual - Manual (Page 28)

24
ARGO U
SER
M
ANUAL
M
INI
M
ECH
1. Unlock and open the security cabinet door.
2. To remove the note tray, grasp the tray handle and slide the tray out of the mechanism. Place note tray
on a fl at level surface.
3. Remove any rejected notes. The reject compartment is located nearest the handle side of the tray.
Removing note tray from the
dispensing mechanism.
Removing rejected notes.
Note: You may wish to record the number of notes removed from the reject compartment
for use when balancing the note tray against the cassette/day close records.
1. Pull the packer plate to the rear of the tray (toward the handle). Ensure the packer plate is fully back.
Maintain pressure on the packer plate as needed while loading notes.
2. Count the number of bills that remain in the cassette, if any. Next, count the number of bills that are
being added into the cassette.
3. Add the number of bills being placed into the cassette to the number that remained. The total number of
these bills will be entered in the Enter Cassette Quantity option (shown in step 6 of C
ASSETTE
C
LOSE
P
ROCEDURES
on previous page).
4. Place the currency into the cassette. Allow at least one inch of clearance between the packer plate when
it is fully retracted and the currency. This will allow the packer plate to compress the currency. Do not
try to over fi ll.
5. Release the packer plate against the notes.
6. Using the handle, slide the note tray into the
dispensing mechanism. Make sure the note tray is
fully inserted!
7. Close and lock the security cabinet.
Loading the Note Tray
Load note tray with currency.