Triton ARGO User Manual - Manual (Page 50)

46
ARGO U
SER
M
ANUAL
Enter Host Phone Number (continued)
3. On the Communications menu, press 1
(Primary Phone Number).
4. Enter the host phone number to dial for
transactions.
5. Press ENTER.
6. Press ENTER again to set changes.
For a secondary, backup phone number, press 2
at step 3 and proceed.
TDL (Triton Dynamic Language)
i s t h e d e f a u l t s e t t i n g f o r
Communications Protocol and is
the dialup protocol.
Changing this setting may change
the options available on this screen.
If setting the Communication Protocol
to TCP/IP, the options on the menu
change. The differences are circled
below. Contact your Host to obtain
correct setup specifi cations to assure
effective communication with the Host.
See the XScale/X2 Configuration
Manual or contact Triton Technical
Support for more help in setting up
communication on your ARGO ATM.
TCP/IP Communication Protocol