Triton ARGO User Manual User Manual
Page 46
Advertising
42
ARGO U
SER
M
ANUAL
4.
A) MiniMech, SDD, SCDU or HCDU
1) Press 7 (Multiple Amount).
2) At prompt, remove selected cassette from
the dispenser, then press Enter.
S
ET
D
ENOMINATION
1. From
the
Main Menu, press 6 (Terminal
Confi guration).
2. Press
4 (Cassette Setup).
3. Press
9 (Cassette Parameters).
(Resolves error code 186.)
Denomination for each cassette must be set up. The process depends on what type dispenser is in the ATM.
Denomination setup steps from this point are
determined by dispenser:
4. A) MiniMech, SDD, SCDU, or HCDU
B) TDM250
C) NMD50
Advertising