Triton ARGO User Manual User Manual
Page 49
Advertising
45
ARGO U
SER
M
ANUAL
9) Press 2 (All Cassettes Locked) to check
(lock) both cassettes.
7) Press 6 (Cassette in Service) to place
cassette in service (checkmark displays).
8) Repeat steps 2-7 for the other NMD
cassette in the dispenser.
4. C) NMD50 (continued)
E
NTER
H
OST
P
HONE
N
UMBER
(Resolves error code 185.)
The default communication protocol is dialup (TDL) as shown here. For other types of communication with
the host processor, see the XScale/X2 Confi guration Manual or contact Technical Support. It is important at
this point to enable the terminal’s ability to communicate with the host processor.
1. From
the
Main Menu, press 6 (Terminal
Confi guration).
2. On
the
Terminal Confi guration menu, press 6
(Communication).
Advertising