Triton 9670 Operation Manual - Manual (Page 125)

S
ECTION
5 - M
ANAGEMENT
F
UNCTIONS
5-78
T
RITON
S
YSTEMS
, I
NC
.
M ULTI -C ASSETTE C ASH D ISPENSER O PERATION M ANUAL M
ODELS
9650/9670
To enter or change an ISO go to the SELECT ISO TO CHANGE screen and perform the following:
1.) Press the Screen Key next to the block where the new ISO will be entered or an ISO changed.
2.) Enter the ISO number (up to six digits in length).
3.) Press the “<OK>” key.
If more than one ISO must be entered repeat steps 1 through 3 until all ISO are entered (up to five
ISO numbers may be entered).
E
RROR
C
ONDITIONS
:
There are no error conditions directly associated with this function.