Triton 9670 Operation Manual - Manual (Page 41)

4-5
M
ULTI
-C
ASSETTE
C
ASH
D
ISPENSER
O
PERATION
M
ANUAL
T RITON S YSTEMS , I NC .
S
ECTION
4 - H
ANDLING
C
ASSETTES
M
ODELS
9650/9670
I
NSTALLING
N
OTE
C
ASSETTES
Once the cassettes have been loaded with currency, replace them using the reverse of the steps used
to remove the cassettes from the mechanism. Slide each Note Cassette into its slot in the mecha-
nism. Make sure each cassette is fully inserted.
Once all cassettes have been filled and replaced, they are ready to be LOCKED into position using
the Cassette Lock/Unlock function (see Section 5, Management Functions, for the appropriate
procedure). IMPORTANT: Ensure the MULTIPLE AMOUNT parameter matches the de-
nomination of currency in each Note Cassette! See the procedure for using the VALUE
function to set this parameter, in Section 5, Management Functions.
O
PENING
N
OTE
C
ASSETTES
1. Open the cassette by simultaneously pressing the release button and lifting the lid. Flip the
lid back fully, allowing it to rest on the table or other flat surface.
Figure 4-5. Cassette Replacement.
Figure 4-6. Release Button.