Triton 9670 Operation Manual - Manual (Page 248)

D-5
T RITON S YSTEMS , I NC .
M
ULTI
-C
ASSETTE
C
ASH
D
ISPENSER
O
PERATION
M
ANUAL
M
ODELS
9650/9670
A
PPENDIX
D - C
ASH
D
ISPENSER
I
NSTALLATION
I
NSTRUCTIONS
C
OMPLETING THE
P
HYSICAL
I
NSTALLATION
1.) The Model 9650 Cash Dispenser state of the art design is quite tolerant to power line
variations, particularly with its integral built-in surge suppressor. However, it is recom-
mended that AC power for the terminal come from a dedicated source with an isolated
ground. Route the AC power cord and the phone cord out through the hole in the back of
the cabinet and install the split ring grommet into the hole. Connect the AC input plug to
the wall outlet. Connect the phone cord into the wall mounted modular phone jack. The
phone line used for the Model 9650 should not be shared with any other device.
2.) If included: install the lamp in the Sign Housing by removing the two screws that secure
the front of the Sign Housing to its rear panel. Plug the 9 watt florescent tube (included
in the accessory kit) into its socket. Install the front of the Sign Housing and secure it in
place with the two screws. Plug the AC power cord coming from the Sign Housing into
the AC outlet on the power supply.
3.) Turn the power switch located inside the top of the cabinet to ON (“I”). Verify the lamp
inside the Sign Housing is illuminated.
4.) Load the receipt printer with paper making sure that the receipt paper roll feeds from the
top of the roll. Once the end of the paper is inserted into the printer it will automatically
feed to the output. Close the Control Panel.
5.) Install currency in the cassettes and insert and them into the dispensing mechanism. Re-
fer to Section 4 of the Model 9650 Cash Dispenser Operation Manual for detailed infor-
mation and procedures concerning handling cassettes.
Figure 5.