Triton 9670 Operation Manual - Manual (Page 21)

2-7
S
ECTION
2 - F
EATURES
M ULTI -C ASSETTE C ASH D ISPENSER O PERATION M ANUAL
T
RITON
S
YSTEMS
, I
NC
.
M
ODELS
9650/9670
Jumper Settings
Memory Expansion Modules have jumpers that must be installed in the right position to oper-
ate correctly. The Memory Expansion Module installed in slot 4 of the card cage must have the
jumpers across pins 1 and 2 of J1 and J2. If a second Memory Expansion Module is installed,
it will be put in slot 5 of the card cage. The jumpers on the second Module must be installed
across pins 2 and 3 of J1 and J2.
Formatting a Memory Module
A Memory Expansion Module is formatted so that it is ready to accept downloaded files from
the Triton Connect Host Computer. All Single-Cassette Cash Dispenser Memory Expansion
Modules are shipped from the factory formatted. If it becomes necessary to format a Memory
Expansion Module, it can be accomplished by two methods.
Formatting a Memory Expansion Module from a Triton Connect Host Computer
The first method uses Triton Connect to send a message to the terminal from the Triton Con-
nect Host Computer that tells it to format a Memory Expansion Module. It uses the Reformat
Memory Options found in the Ad Graphics/File Manager folder of the Terminal Parameters
Option in the Triton Connect Terminal Manager to format the Module. There are separate
options to format memory modules 1 and 2.
Formatting a Memory Expansion Module at the Local Terminal
The Memory Expansion Modules can also be formatted from the local terminal through the
Management Functions. Refer to Section 5, Management Functions, for procedures.
•
AD Screens
An Ad Screen is a promotional or advertising graphic that is displayed on the Cash Dispenser
LCD screen. It is displayed alternately with the Customer Welcome screen graphic (while the
terminal is idle) and while a customer transaction is being processed. Triton Connect Software
Release 1.8 or higher is required to support the use of AD Screens.
Triton Connect has the ability to format 16-bit color graphics for use in AD Screens (this
requires the optional 16-color LCD display), to format monochrome graphics for use in receipt
printouts, and to create text-based messages.