Triton 9200 Operation Manual - Manual (Page 14)

2-4
S
ECTION
2 - F
EATURES
T
RITON
S
YSTEMS
, I
NC
.
M ODEL 9200 S UPER S CRIP TM O PERATION M ANUAL
•
Exit Message
This feature allows a message to be displayed to the customer at the conclusion of a transaction.
The content of the message is determined by the operator.
•
Predial Capability
By initiating the call to the processor immediately after the PIN is keyed in, the actual transaction,
once selected, can be completed more quickly. If desired, the predial capability can be disabled, in
which case the call to the processor will not be made until after the customer actually chooses a
transaction.
•
Alarm Thresholds
NOTE: This feature must be used in conjunction with Triton Connect version 3.0 or later.
This feature enables the terminal to detect and automatically report the following conditions to a
remote personal computer (PC) that is running Triton Connect (version 3.0 or later):
1.) The number of journal entries has risen above a pre-defined threshold.
2.) Scheduled transfer of journal data to a remote Triton Connect host computer. This time can
be set at the terminal or via Triton Connect
•
Transaction and Account Type Configuration
This feature enables the terminal operator to select the types of transactions (transfers or balance
inquiries) or accounts (savings or credit card) that will be presented to the customer. This feature
does not affect the availability of checking account withdrawal transactions, which are always
presented.
•
Internal Electronic Journal
The Terminal features a solid state internal electronic journal. The details of each transaction
are stored in the journal’s memory, and can be retrieved at a later date. When needed, just the
information desired can be recalled and a printout of the records made.
Normally, journal data is printed by the unit’s receipt printer, but with the optional Triton Con-
nect software package the information can be sent to a remote PC (Personal Computer) for
storage and subsequent analysis. Even after a transaction record has been printed to the receipt
printer, it can still be read and printed again. Old records are retained in the journal until 256
records have been stored, at which time the journal must be printed or cleared.