Triton 9200 Operation Manual - Manual (Page 156)

6-2
S
ECTION
6 - M
AINTENANCE
T
RITON
S
YSTEMS
, I
NC
.
M ODEL 9200 S UPER S CRIP TM O PERATION M ANUAL
*** WARNING ***
No attempt should be made to repair or service
this unit by the user! Any such attempt may dam-
age the unit and will void the warranty.
C
LEANING THE
E
NCLOSURE
The Terminal front panel is highly durable, resisting scratches and finger smudges. However,
occasional cleaning of the front panel and the plastic enclosure may be desirable. A soft dry or
slightly damp cloth may be used for cleaning. For best results, a weak solution of a mild detergent
and water should be used.
***WARNING***
Avoid using abrasive cleaners on any surface of
the SuperScrip Terminal. Do not spray cleaner
liquids directly on the unit. .
C
LEANING THE
D
ISPLAY
The Liquid Crystal Display (LCD) on the front of the SuperScrip Terminal has a plastic protective
window that should be cleaned only with a SOFT cloth, dampened with a weak solution of a mild
detergent and water.
***WARNING***
Do not use any abrasive cleaners on the
window, as it will scratch. Do not spray
liquids onto the screen, as they may run
down inside the unit and cause damage.
C
ARD
R
EADER
M
AINTENANCE
Triton provides special cleaning cards for proper
maintenance of the card reader. The reader
should be cleaned at least once a month by in-
serting and removing the card as shown in Fig-
ure 6-1. It may be necessary to clean the card
reader more often in locations that see heavy
usage.
CLEANING CARD
Figure 6-1. Use the cleaning cards on a
monthly basis to maintain effective card
reader operation.