Ft7000, Warning – Triton FT7000XP Installation Manual User Manual
Page 28
28
FT7000
XP
- S
ITE
P
REPARATION
AND
I
NSTALLATION
G
UIDE
1. The FT7000
XP
will be secured on a wooden pallet. Move the pallet using a pallet jack/forklift to the
desired location before unpacking.
2. Carefully inspect the unit for any shipping damage and report any damage immediately to the shipping
company. Refer to the warranty information in the User manual for information about reporting shipping
damage.
3. After unpacking the unit, remove the four (4) bolts that secure the leveling feets “Plinth” (figure
below) to the wooden pallet.
U
NPACKING
THE
U
NIT
*** WARNING ***
The FT7000
XP
unit is slightly top heavy. USE
EXTREME CAUTION! Always move/support the
unit from the FRONT! 2-personnel are
recommended when unpacking and moving the
unit!!
12
12
12
12
12
12
12
12
12345678901234567890123
12345678901234567890123
12345678901234567890123
1
1
1
1
1
1
1
1
4. From the rear of the unit, place a lifting /moving device (forklift, lifting jack, etc) under the cabinet
bottom (between the leveling bolts) and lift the unit from the pallet.