Triton FT7000XP Installation Manual - Manual (Page 45)

45
S
TEP
9: S
EALING THE
C
OLLAR
B
RACKETS
:
A good weather seal is required between the exterior wall and the collar bracket hardware installed in Step
6. DO NOT seal around the control panel collar as this has a water-resistant gasket factory installed.
A suitable water-resistant sealant product must be applied to three (3) sides of the collar brackets
hardware. If using caulk, recommend a clear color (not white). There are also products that are color
tinted to closely match the trim color or any customer-provided shroud..
FT7000 XP - S
ITE
P
REPARATION AND
I
NSTALLATION
G
UIDE
** IMPORTANT **
S
EAL THE COLLAR HARDWARE TO THE EXTERIOR WALL
TO PREVENT WATER INTRUSION
.
DO NOT SEAL AROUND THE BOTTOM!
THE UNDERSIDE MUST BE CLEAR.