Triton FT7000XP Installation Manual - Manual (Page 33)

33
S
ITE
P
REPARATION
/ I
NSTALLATION
5. Once again, push down on the dispenser tray latch (Green) and extend the slide tray fully, locked
position.
6. Remount the dispenser keeper brackets and secure with the thumbscrews (2, each side). The flange on
the brackets press up against the edge of the black plastic guide rail.
7. Reconnect the dispenser Security module to the dispenser. Next, reconnect the cables to the dis-
penser circuit board. Note: See mounting/connection locations on Pg. 30, step 5.
8. Push down on the dispenser tray latch (Green) and slide the dispenser fully into the cabinet. Release
the latch.