Astro Design PORTABLE SIGNAL GENERATOR PROGRAMMING SOFTWARE SP-8848 - Manual (Page 112)

e.g.) Suppose the data is set as below in [VGBase] [Config] [Interface] [VG(LAN)].
No. VGName IP address Setting of IP address
1 VG1 192.168.16.54 Class C
2 VG2 192.168.16.55 Class C
3 VG3 192.255.255.255 Class A
4 VG4 172.16.255.255 Class B
5 VG5 192.168.16.60 Class C
In this case, the IP address that is set in No. 1 is Class C, the data is transmitted only to VG1, VG2 and VG5 whose IP
address is set as Class C. The data is not transmitted to VG3 and VG4, since they are set as different class.
(6) Error status
The VG that occurs transmission error and error contents are displayed.
(7) Program ends
Press [Exit] button and the program closes.
104